1 kg Silicon casting slip

Only shipping in following countries: DE, AT, DK, F, GB, PL, NL, CZ
Silicon rubber casting compound, 2 compoments, hardening by room temperature.
Price for basis compound incl. hardener, time to work 30 min, hardening tine ca. 12 h
(1 kg =  860 ml Volume)

Mixing ratio by weight: Base Compound A : Hardener B = 10 : 1
Processing time (pot life) after mixing components: 40 – 60 minutes
Processing temperature: +10°C to +30°C

Processing: Add Hardener B to Base Compound A and mix thoroughly. Demolding is possible after a minimum of 8 hours.
Storage: Seal opened containers airtight. Store at room temperature.
CAUTION: The cured material is not fully resistant to polyester and PMMA resins.

The hardener contains: Bis(neodecanoyloxy)dimethylstannane
May cause an allergic skin reaction. May damage the unborn child. May cause damage to organs through prolonged or repeated exposure.
Obtain special instructions before use. Wear protective gloves and eye/face protection.
IF ON SKIN: Wash with plenty of water and soap. Take off contaminated clothing and wash it before reuse.